1. ABB
  2. Single-Phase
  3. Cyberex® 2400 UPS
ABB Cyberex® 2400 UPS

Cyberex® 2400 UPS 18kVA/14.4kW, 24kVA/19.2kW

The Cyberex 2400 provides quality power in the event of power loss by utilizing fault tolerant electronics with redundant control functions and advanced communication capabilities. The C2400 has standard features including Ethernet, Secured Web Server, Modbus communications, advanced battery management capabilities and remote system monitoring. The C2400 is designed with high reliability components, redundancy in critical components, self checking software and no single point of failure that jeopardizes the critical load. In addition, the C2400 is a unique product with split phase design, rated at 208 volts power and 240/120 volt output configurations. Ideal for retail, commercial, small enterprise applications and other critical facility requirements, the C2400 is a solution to changing electrical demands.

Interested?

Order Now!
Standard Features:
  • Ratings are 18 and 24kVA
  • Wide input voltage range ( ± 10% from Nominal) at full load
  • Advanced airflow design to improve system operation and reliability
  • High quality split or single phase output
  • Advanced battery monitoring system
  • Advanced remote system monitoring via building management or webserver
  • Enhanced battery reliability
  • Easy serviceability
  • Higher Mean Time Between Failure (MTBF)
  • Low cost of ownership
    •

General data

System power range

18; 24 kVA

AC Input

Voltage

208 VAC, 3W + G

Voltage range

± 10% from Nominal
Phase 2 Phase
Power factor  > 0.98 at nominal load
Surge withstand  Meets IEEE 587/ANSI C62.41

Frequency

60 Hz standard; 50 Hz optional

AC Output

Maximum load capacity

2 Modules – 8kW/8.6kVA/0.9 PF on each of line 1 and 2
3 Modules – 9.6kW/12kVA/0.8 PF on each of line 1 and 2

Voltage

120VAC Line 1 to Neutral
120VAC Line 2 to Neutral

Current (nominal)

72A (18kVA, 2-Module)
100A (24kVA, 3-Module)
continuous on each of Line 1 and Line 2
Load regulation  ± 2% for 0 – 100% load
Voltage distortion THD

< 2% with linear load,
< 5% with non-linear load
Power factor Unity to 0.8 lagging or leading
Overload rating (Inverter) 100% – 130% for 1 min
130% – 150% for 30 sec
150% – 200% for 3 sec
200% for 0.09 sec
Overload rating (Static Switch) 100% – 150% for 10 minutes
150% – 200% for 30 seconds
> 200% for 1 sec
Efficiency > 89% at full load
Over-current protection Each circuit breaker rated for 10 kAIC
Voltage transient withstand Pp to 20,000 volt spike per IEEE category C62.41 C3 standard
Batteries runtime 8 min at 80% of load

Communications

User interface

Integral network interface

Communication ports

Modbus and Ethernet

Indications

LCD Screen

Environmental

Operating temperature

0–40°C

Storage temperature

0–60°C, without batteries

Relative humidity

5–95% non-condensing

Operating altitude

Up to 6000 ft above sea level
Access Front + rear, front + side
Noise level < 70 dBA at 6 ft